Mill Secondary Material for Micropile Casing

The use of mill secondary casing material for micropile construction is an important factor in the overall economy of the use of micropiles in the United States. Mill secondary casing material meets all strength and durability requirements needed for satisfactory micropile performance providing that adequate coupon sampling is performed to verify casing strength and ductility. In fact, there is no benefit to using prime casing as opposed to mill secondary material in terms of micropile performance. Despite the lack of additional benefit, the cost of prime casing is generally two or more times that of mill secondary casing resulting in much higher overall micropile cost if prime casing is specified by the owner.

The use of mill secondary material as micropile casing has been recognized as the industry standard for many years and is provided for in all industry standard micropile specifications.  However, many project specifications include requirements to provide prime casing with mill certifications as opposed to mill secondary material will coupon tests for micropile casing resulting in excessive additional cost with no apparent benefit to the owner. The additional cost of prime casing is significant and results in an unnecessary waste of the owner’s resources.

The DFI / ADSC Micropile Committee has formed a Task Force to author a position paper on this subject. The goal of this position paper is to educate contractors, specifiers and owners on the proper use of mill secondary material for micropile casing so that satisfactory performance will be achieved and an economical end product will be provided. The issue of traceability for purposes of verifying that material is domestic for compliance with Buy America provisions will also be discussed.

5.5" Micropile Casing
Advertisements

4 thoughts on “Mill Secondary Material for Micropile Casing

  1. Very good informations thank you alot for it . will you please give me more details and pictures and difenitions of this materials (mill) …

  2. Amin,

    I attached a photograph of micropile casing that utilizes mill secondary material. See updated post. This actually is the norm for micropile casing. Hopefully the paper will be available in a couple of months for distribution. It is still in committee. Most micropile casing is 80 ksi material. Most mill secondary material is material that was originally intended for use as API N80 classification.

  3. Thank you very much … I will follow the details … very uaful informations .. by my best wishes ..( Amin .. Sudan ..civil engineer ..)

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s